p. Lire is a wonderful log reporting tool released by LogReport. However, installing Lire may sometimes get too complicated for the novice sysadmin.

p. Here is a short tutorial I wrote that documents how to install and configure Lire.

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

<br /> mkdir /opt/lire<br /> cd /opt/lire<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p> <p>

p. Style Sheets – if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by LogReport. However, installing Lire may sometimes get too complicated for the novice sysadmin.

p. Here is a short tutorial I wrote that documents how to install and configure Lire.

HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

<br /> mkdir /opt/lire<br /> cd /opt/lire<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p> <p>

p. Style Sheets – if you want the reports to be generated in HTML format. You can get these like

``

p. the lire software

```p. Lire is a wonderful log reporting tool released by LogReport. However, installing Lire may sometimes get too complicated for the novice sysadmin.

p. Here is a short tutorial I wrote that documents how to install and configure Lire.

HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

<br /> mkdir /opt/lire<br /> cd /opt/lire<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p> <p>

p. Style Sheets – if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by LogReport. However, installing Lire may sometimes get too complicated for the novice sysadmin.

p. Here is a short tutorial I wrote that documents how to install and configure Lire.

HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

<br /> mkdir /opt/lire<br /> cd /opt/lire<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br /> wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p> <p>

p. Style Sheets – if you want the reports to be generated in HTML format. You can get these like

``

p. the lire software


p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

p. Usually, installation of most perl modules require you to perform the following steps:


p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.


You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

You now need to edit the configuration file.


p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

p. You probably want to edit the tag, “lr_output_format” to “html” to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

*Configuring your email setup:*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:


Add the following line to the &#8220;assign&#8221; file:

````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

Add the following line to the “assign” file:


Now 508 is the uid and gid of the user lire on my system. This will most definitely vary on your system. Also remember that the assign file has to terminate in a &#8220;.&#8221;, i.e., the last line of the assign file must contain a &#8220;.&#8221; character.

Then run the qmail-newu command.

`````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

``````` 

Add the following line to the &#8220;assign&#8221; file:

````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

``````` 

Add the following line to the &#8220;assign&#8221; file:

Now 508 is the uid and gid of the user lire on my system. This will most definitely vary on your system. Also remember that the assign file has to terminate in a “.”, i.e., the last line of the assign file must contain a “.” character.

Then run the qmail-newu command.


Now create a mailbox for syslog, under /home/lire/lire/var/spool/lire, as user lire

``````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

``````` 

Add the following line to the &#8220;assign&#8221; file:

````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

``````` 

Add the following line to the &#8220;assign&#8221; file:

```````` 

Now 508 is the uid and gid of the user lire on my system. This will most definitely vary on your system. Also remember that the assign file has to terminate in a &#8220;.&#8221;, i.e., the last line of the assign file must contain a &#8220;.&#8221; character.

Then run the qmail-newu command.

`````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

``````` 

Add the following line to the &#8220;assign&#8221; file:

````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

``````` 

Add the following line to the &#8220;assign&#8221; file:

```````` 

Now 508 is the uid and gid of the user lire on my system. This will most definitely vary on your system. Also remember that the assign file has to terminate in a &#8220;.&#8221;, i.e., the last line of the assign file must contain a &#8220;.&#8221; character.

Then run the qmail-newu command.

Now create a mailbox for syslog, under /home/lire/lire/var/spool/lire, as user lire


p. You can even use the lr\_setup\_responder script to create Maildirs for all the log formats that Lire supports. However, Lire needs the maildirmake in one of the folders set in your &#36;PATH variable. Just create a symlink for maildirmake under /usr/local/bin, or just add /var/qmail/bin to your $PATH variable.

p. We are almost done. You will now need to create a .qmail-syslog entry under /home/lire/, which contains the following:

```````````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

``````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

`````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

```p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

``p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt/lire<br />
cd /opt/lire<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/L/LD/LDS/GD-1.18.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDGraph-1.43.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MA/MARKOV/MailTools-1.60.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/M/MV/MVERB/GDTextUtil-0.86.tar.gz<br />
wget http://search.cpan.org/CPAN/authors/id/E/ER/ERYQ/MIME-tools-5.411a.tar.gz</p>
<p>`

p. Style Sheets &#8211; if you want the reports to be generated in HTML format. You can get these like

`` 

p. the lire software

``` 

p. Usually, installation of most perl modules require you to perform the following steps:

```` 

p. You can either install the docbooks properly under the SGML tree of your Linux installation, or you can simply set an environment variable pointing to the extracted directories for Lire installation.

p. It is recommended that you create a special account for running Lire.

````` 

You now need to edit the configuration file. 

`````` 

p. You probably want to edit the tag, &#8220;lr\_output\_format&#8221; to &#8220;html&#8221; to get the reports in HTML. Most other stuff should be all right as a beginner. I must also point that the documentation suggests this file should not be edited, and custom changes should be made in other config files. However, since we are making only the one change, I guess its all right.

\*Configuring your email setup:\*

p. Now that we have Lire setup as an online responder, we will need to configure the mail server so as to accept emails and pass it on to Lire. I personally use Qmail a lot, and hence the following setup depicts configuration of Qmail to work with Lire. If you use some other email server, the setup should be similar. You can refer to this specific part in the Lire documentation. I am also assuming that Qmail is installed on your machine, and is a standard install (/var/qmail)

p. Let us say, you want to send the syslog files from all your servers to the email address syslog@yourlogserver.com. We then need to configure qmail to accept mail for syslog and pass it on to a mailbox, preferrably, that of user lire.

p. You may need to perform the following actions as root:

```````p. Lire is a wonderful log reporting tool released by <a target="_new" href="http://www.logreport.org">LogReport</a>. However, installing Lire may sometimes get too complicated for the novice sysadmin. 

p. Here is a short tutorial I wrote that documents how to install and configure Lire.
  
HUGOMORE42

p. Lire can be setup in two ways. A standalone installation generates reports for the logs on the machines. In a more useful setup, a server simply sends the log files to an online Lire responder, which generates the reports and emails the report back to the either the From address or the Reply-To address of the generating email.

p. We will look at a client-responder setup. The standalone installation is very similar except for a few changes.

p. Setup a machine which will act as the Lire responder. There are no special requirements, but I used RedHat 9 on a standard box, as the online responder. You will then need to install the following perl modules. All these modules can be found at cpan.org. I am adding links for your convenience.

`<br />
mkdir /opt